SafeTrack In/Out Message boards are widely used in offices and reception areas as an easy way to facilitate effective scheduling and communication in the workplace.
The dry wipe magnetic whiteboard can be used with dry wipe marker pens and magnetic accessories. The whiteboard surface is 17 x 29 cm width x height. A line clearly separates each person so that messages can be clearly read / written.
Magiboards' SafeTrack In/Out Message Boards have also been designed with a fire evacuation in mind:
Magnetic attachment means taking these on and off the wall is literally a quick few seconds operation helping you and your colleagues to get out of the building safely
Light weight boards are easy to carry
In/Out sliders stay in place even when the board is held upside down so it is totally clear who is in (and not in) the building.
Easy to update names if staff change, adding to the life cycle of the product
The square edges make it easy to add a board if your company expands
Eco friendly solution
The In/Out Message Boards are made from recycled PVC with a steel insert. The header panel allows you to write the department name. Each name plate is made from a C section magnetic rubber which is supplied with plain paper insert and a protective plastic cover. Simply remove the C section to update a name. Each name plate is 12 cm long x 2 cm high.
The in and out sliders glide left and right. It is a smooth action but tight enough to stop the sliders moving by accident. The sliders are 4 cm wide x 2 cm high.
To fix the boards, simply fix the pre drilled fixing rails, supplied with the boards, to the wall. The In/Out Message boards have 2 high strength magnets rivetted to the reverse which then attach magnetically into the fixing rails. Each fixing rail will have 2 corresponding high strength magnets on the reverse of the board. It is Quick and Easy to hang and remove the In/Out Message Boards. To simply print off your names and headers, you can download a handy template from the downloads tab below.
The square edge design makes this a very versatile product. The boards are multiples of the 10 name In/Out Message board, which allows you to choose where you put the additional 20 name message boards. Place to the side to create a wider display, or place one above the above the other if you have a narrow wall area. Each 10 name message board measures 416 x 350 mm
- General
- SafeTrack In/Out Message boards are widely used in offices and reception areas as an easy way to facilitate effective scheduling and communication in the workplace.
The dry wipe magnetic whiteboard can be used with dry wipe marker pens and magnetic accessories. The whiteboard surface is 17 x 29 cm width x height. A line clearly separates each person so that messages can be clearly read / written.
Magiboards' SafeTrack In/Out Message Boards have also been designed with a fire evacuation in mind:
Magnetic attachment means taking these on and off the wall is literally a quick few seconds operation helping you and your colleagues to get out of the building safely
Light weight boards are easy to carry
In/Out sliders stay in place even when the board is held upside down so it is totally clear who is in (and not in) the building.
Easy to update names if staff change, adding to the life cycle of the product
The square edges make it easy to add a board if your company expands
Eco friendly solution
The In/Out Message Boards are made from recycled PVC with a steel insert. The header panel allows you to write the department name. Each name plate is made from a C section magnetic rubber which is supplied with plain paper insert and a protective plastic cover. Simply remove the C section to update a name. Each name plate is 12 cm long x 2 cm high.
The in and out sliders glide left and right. It is a smooth action but tight enough to stop the sliders moving by accident. The sliders are 4 cm wide x 2 cm high.
To fix the boards, simply fix the pre drilled fixing rails, supplied with the boards, to the wall. The In/Out Message boards have 2 high strength magnets rivetted to the reverse which then attach magnetically into the fixing rails. Each fixing rail will have 2 corresponding high strength magnets on the reverse of the board. It is Quick and Easy to hang and remove the In/Out Message Boards. To simply print off your names and headers, you can download a handy template from the downloads tab below.
The square edge design makes this a very versatile product. The boards are multiples of the 10 name In/Out Message board, which allows you to choose where you put the additional 20 name message boards. Place to the side to create a wider display, or place one above the above the other if you have a narrow wall area. Each 10 name message board measures 416 x 350 mm
| 2 year product guarantee |
| All fixings included for wall fixing |
| Each 10 name board is 41.6 x 35 cm width x height |
| Magnetic dry wipe whiteboard |
| Magnetically attaches to the wall in seconds |
| Paper inserts and plastic protective covers included |
| Simply add additional boards for a larger display |