SafeTrack In/Out Photo Boards are mainly used In the case of emergencies or evacuations, to provide a quick way to see who is in the workplace, ensuring everyone's safety and accounting for any missing employees. The In/Out Photo boards are also often used in reception areas as an easy way for people to put a face to a name!
Magiboards In/Out Photo Boards have been designed with a fire evacuation in mind:
Magnetic attachment means taking these on and off the wall is literally a quick few seconds operation helping you and your colleagues to get out of the building safely
Light weight boards are easy to carry
In Out sliders stay in place even when the board is held upside down so it is totally clear who is in (and not in) the building.
Easy to update names and photos if staff change, adding to the life cycle of the product
The square edges make it easy to add a board if your company expands
Eco friendly solution
The In/Out Staff Photo boards are made from recycled PVC with a steel insert. The header panel allows you to write the department name. Each name plate is made from a C section magnetic rubber which is supplied with a protective plastic cover. Simply remove the C section to update a name. Each name plate is 12 cm long x 2 cm high. To simply print off your names and headers, you can download a handy template from the downloads tab above. There is an additional template for the photos.
The in and out sliders glide left and right. It is a smooth action but tight enough to stop the sliders moving by accident. The sliders are 4 cm wide x 2 cm high.
To fix the boards, simply fix the pre drilled fixing rails, supplied with the boards, to the wall. The In/Out Photo boards have 2 high strength magnets rivetted to the reverse which then attach magnetically into the fixing rails. Each fixing rail will have 2 corresponding high strength magnets on the reverse of the board. It is Quick and Easy to hang and remove the In/Out Photo Boards
The square edge design makes this a very versatile product. The larger boards are multiples of the 5 name In/Out Photo board. You can choose where you put the additional photo boards. Place to the side to create a wider display, or place one above the above the other if you have a narrow wall area. Each 5 name photo board measures 208 x 350 mm
- General
- SafeTrack In/Out Photo Boards are mainly used In the case of emergencies or evacuations, to provide a quick way to see who is in the workplace, ensuring everyone's safety and accounting for any missing employees. The In/Out Photo boards are also often used in reception areas as an easy way for people to put a face to a name!
Magiboards In/Out Photo Boards have been designed with a fire evacuation in mind:
Magnetic attachment means taking these on and off the wall is literally a quick few seconds operation helping you and your colleagues to get out of the building safely
Light weight boards are easy to carry
In Out sliders stay in place even when the board is held upside down so it is totally clear who is in (and not in) the building.
Easy to update names and photos if staff change, adding to the life cycle of the product
The square edges make it easy to add a board if your company expands
Eco friendly solution
The In/Out Staff Photo boards are made from recycled PVC with a steel insert. The header panel allows you to write the department name. Each name plate is made from a C section magnetic rubber which is supplied with a protective plastic cover. Simply remove the C section to update a name. Each name plate is 12 cm long x 2 cm high. To simply print off your names and headers, you can download a handy template from the downloads tab above. There is an additional template for the photos.
The in and out sliders glide left and right. It is a smooth action but tight enough to stop the sliders moving by accident. The sliders are 4 cm wide x 2 cm high.
To fix the boards, simply fix the pre drilled fixing rails, supplied with the boards, to the wall. The In/Out Photo boards have 2 high strength magnets rivetted to the reverse which then attach magnetically into the fixing rails. Each fixing rail will have 2 corresponding high strength magnets on the reverse of the board. It is Quick and Easy to hang and remove the In/Out Photo Boards
The square edge design makes this a very versatile product. The larger boards are multiples of the 5 name In/Out Photo board. You can choose where you put the additional photo boards. Place to the side to create a wider display, or place one above the above the other if you have a narrow wall area. Each 5 name photo board measures 208 x 350 mm
| 2 year product guarantee |
| All fixings included for wall fixing |
| Downloadable templates for the names and photos |
| Each 5 name board is 20.8 x 35 cm width x height |
| Magnetically attaches to the wall in seconds |
| Plastic protective covers included |