TL-SG1210MP is an unmanaged switch with 10 Gigabit ports that requires no configuration and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.
8 RJ45 ports (port 1 to port 8) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).
TL-SG1210MP has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is ? 123 W*, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.
- General
- TL-SG1210MP is an unmanaged switch with 10 Gigabit ports that requires no configuration and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.
8 RJ45 ports (port 1 to port 8) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).
TL-SG1210MP has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is ? 123 W*, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.
8x PoE+ ports transfer data and power via a single cable with a total power budget of 123 W |
9x gigabit RJ45 ports, and 1x gigabit combo SFP/RJ45 Port |
Automatically reboots your dropped or unresponsive PoE-powered devices with PoE Auto Recovery. |
Compliance with IEEE 802.3af/at PoE+, the switch supports PoE Power up to 30 W for each PoE port |
Fanless design |
Isolation Mode allows one-click client traffic separation for higher security and performance |
Plug and play |
Priority Mode ensures high priority of ports 1-2 to guarantee the quality of the sensitive applications |
Up to 250 m data and power transmission range under Extend Mode |