After,?6 minutes switch machine on to filter through remainder of solution, before runnng the mahcine thwough twice with clean water.Shower Heads: |
Detatch shower head, sprinkler nozzle and place in a jug. |
Empty contants of 1 sachet into jug and ad how water to cover sprinkler holes. Leave for,?6 minutes.Pour solution away, rinse well with clean water and reassemble shower head. |
Half fill kettle with water and boil (do not overfill). Unplug and place in empty sink. Slowly add contents of sachet. Leave for,?6 minutes. Use 2 sachets for heavy scale. |
Half fill water reservoir with water and add contents of sachet. |
Heat iron until it is hand hot and then unplug (ensure iron is switched OFF during descaling). Empty contents of sachet into a jug and pour into iron's water chamber. Top up with water and set to steam position (but DO NOT turn iron on). |
If any limescale remains, reheat solution until it fizzes (DO NOT boil as this may cause overflow). |
Place iron in an empty plastic bowl with the warm plate facing down. Shake gently until solution starts to drain through steam holes. Leaver for,?6 minutes (or until empty). If iron has a spray button, briefly pump any remaining solution through. |
Pour solution away, rinse kettle with cold water, boil again with clean water and rinse once more.Steam Irons: (Check manufacturer's instructions before use as some irons may not be suitable for treatment) |
Rinse thoroughly with cold water, drain and dry. To sensure solution is completely cleaned from iron, briefly iron a spare piece of fabric before using.Coffee Makers: |
Switch machine on and allow about half of the solution to filter through before switching off. |